Iron Nanoparticles Protected by Chainmail-structured Graphene for Durable Electrocatalytic Nitrate Reduction to Nitrogen

The electrochemical nitrate reduction reaction (NO₃RR) is an appealing technology for regulating the nitrogen cycle. Metallic iron is one of the well-known electrocatalysts for NO₃RR, but it suffers from poor durability due to leaching and oxidation of iron during the electrocatalytic process. In this work, a graphene-nanochainmail-protected iron nanoparticle (Fe@Gnc) electrocatalyst is reported. It displays superior nitrate removal efficiency and high nitrogen selectivity. Notably, the catalyst delivers exceptional stability and durability, with the nitrate removal rate and nitrogen selectivity remained ≈96 % of that of the first time after up to 40 cycles (24 h for one cycle). As expected, the conductive graphene nanochainmail provides robust protection for the internal iron active sites, allowing Fe@Gnc to maintain its long-lasting electrochemical nitrate catalytic activity. This research proposes a workable solution for the scientific challenge of poor lasting ability of iron-based electrocatalysts in large-scale industrialization.     

Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm⁻² without polarization voltage increasing, while their Li||LiFePO₄ full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.     

Effect of Aluminum Alloy Surface Modification on Adhesion of the Modified Polyurethane Coating and Its Corrosion Protective Performance北大核心CSCD

The ordinary organic coatings on aluminum alloy usually encounter a problem of low adhesion to the substrate, which results in destruction and failure of the long-term protective performance of the anticorrosion systems. The surface modification of aluminum alloy is able to enhance the adhesion of organic coating on aluminum alloys, and to improve their protective performance. In this work, a combined surface modification of anodic oxidation and mussel adhesion protein/CeO2/3-aminopropyltriethoxysilane composite film (MCA) was developed on the aluminum alloy. The adhesion of modified polyurethane coated on the treated aluminum alloy and its corrosion protective performance were evaluated comprehensively by using contact angle, adhesion strength, electrochemical impedance spectroscopy (EIS), and scanning reference electrode technique (SRET). The measurements of EIS and SRET demonstrated that the MCA composite film on anodic oxidized Al possessed self-healing function and provided effective protection against early corrosion of aluminum alloy. The pull-off test showed that both anodic oxidation treatment and MCA composite film modification were able to increase the adhesion of modified polyurethane coating on aluminum alloy, and their combined action were supposed to remarkably enhance the adhesion strength up to 17.1 MPa. The reason for the improvement of adhesion was that the anodic oxidation treatment and MCA composite film modification could improve the surface roughness of aluminum alloy, and enhance the surface wettability and surface polarity, which is beneficent to enhance the bonding of the modified polyurethane coating to aluminum alloy surface. The EIS results showed that no any corrosion occurred for the modified polyurethane coating on the treated aluminum alloy during 65 d immersion in 3.5wt.% NaCl solution. The impedance value in low frequency range of the modified polyurethane coating always maintained at a high order of magnitude on the aluminum alloy treated by anodic oxidation and MCA composite film modification, showing an excellent protective performance of the coating system. The evaluation of Neutral Salt Spray (NSS) indicated that the modified polyurethane coating on the treated aluminum alloy owned superior corrosion protection performance, and the adhesion strength remained 13.1 MPa and no any corrosion was found at the scratch locations even after 1200 h of salt spray testing. It was concluded that combination of anodic oxidation and MCA composite film were capable of significantly improving the adhesion of modified polyurethane coating on aluminum alloy and providing long-term effective corrosion protection for aluminum alloy. © 2021 Authors. All rights reserved.     

透明质酸纳米材料在荧光/光声成像和光疗中的应用

荧光/光声成像和光疗技术的生物医学应用引起了人们越来越多的关注, 然而很多荧光/光声造影剂存在生物相容性较差, 缺乏肿瘤靶向性, 信噪比较低, 功能单一等共性问题, 严重限制其诊疗应用. 透明质酸具有优异的生物相容性和主动肿瘤靶向性, 可被透明质酸酶降解, 并且易于化学修饰和实现多种超分子弱相互作用力协同工作. 因此, 人们将透明质酸与荧光/光声造影剂结合制备纳米材料, 使其在细胞乃至活体的标记性能和治疗效果获得了很大的改善. 本文综述了将两类物质结合制备纳米材料的方法, 着重阐述了纳米材料的结构与性能关系, 为其未来设计和开发提供了指导, 最后对存在的主要问题以及未来的重要研究方向进行了分析和展望.     

Supramolecular Engineering Strategy to Construct BODIPY-Based White Light Emission Materials

Two kinds of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dyads BDP-OH containing 4-hydroxystyrene groups and BDP-PY bearing pyridinyl units were prepared. In addition, a naphthalene derivative NAP-PY modified by pyridinyl moieties substituent was made. The above three dyads could be used to construct white-light emission (WLE) material by a supramolecular engineering strategy due to their three primary colors of blue, green and red. The supramolecular correlations between the hydroxyl group of BDP-OH and the pyridinyl groups of NAP-PY and BDP-PY were confirmed by ¹H NMR titration, 2D NOESY and FTIR. A fluorescence monitor application was carried out based on the realization of WLE. This work might be useful for designing other WLE supramolecular systems and image display.     

铜修饰微电极阵列硝酸根检测（英文）

许多水域含有过量的硝酸根,会诱发许多问题。采用微机电系统工艺,制备出一种基于铂叉指微电极阵列的硝酸根离子(NO-3)检测微传感电极。通过电化学恒电位沉积法在铂叉指微电极阵列上修饰,得到多孔、簇状铜敏感膜。采用线性扫描伏安电化学检测方法,考察该微传感电极对NO-3的响应性能,在0~2mg/L浓度范围内,线性度为0.999,灵敏度为-3.15μA·L·mg-1。在相同沉积修饰条件下,叉指微电极比同等敏感面积(1mm2)的圆盘微电极表现出更强的催化活性和更高的灵敏度,分析其原因,认为主要是叉指微电极的结构和边缘效应造成的。     

Global stability for infinite-delay,dispersive Lotka-Volterra systems: Weakly interacting populations in nearly identical patches

A Lotka-Volterra-like model ofm interacting species which can disperse amongn discrete habitats and where species interaction terms involve general unbounded delays is shown to possess a globally stable equilibrium when the undelayed intraspecific competition term dominates interspecific interactions as well as the delayed intraspecific competition effect and when then habitats are nearly identical.     

A finite element analysis for the temperature field produced by a moving heat source

Using moving mesh finite element method we discuss the temperature field produced by a moving heat source with the variable thermal conductivity and with the raUioative and convective boundary conditions in a wide range of the velocity. The temperature-time relationships at various velocities in the static and moving coordinate systems are studied. The steady-state temperature distributions at various velocities in the moving coordinate systems are given. The temperature field produced by the plastic deformation at the process region (a region very near the crack tip) is also studied, and the results show that the highest temperature at the process region is lower than 1000℃ or 1832℉